GTA 6 news, rumours and guides, updated around the clock

GTA 6 is out now on PS5 and Xbox Series X|S

Tracking 32 sources

Loading search

GTA 6 HDR calibration is off: the settings that fix it

HDTVTest found GTA 6's HDR calibration screen doesn't match the game's real output. Here's why the image looks dark or flat and the settings to use instead.

Reported. Established outlets report this. Rockstar hasn't said so.

Friends on a boat watch a dolphin, official GTA 6 render
Image: Rockstar Games

If GTA 6 looks too dark or oddly flat on your HDR TV, the cause may be the game's own calibration screen. Display analyst Vincent Teoh of HDTVTest tested it on a high-end Sony reference monitor. He found that the values the calibration patterns tell you to pick don't match what the game actually puts on screen, so following them by the book can leave you with a dim or washed-out picture.

Where the calibration goes wrong

Teoh's measurements turned up several problems:

  • Peak brightness falls short. On a display that peaks at 1,000 nits, setting Maximum Brightness to 1,000 should push the brightest highlights, like direct sunlight, to that level. In his testing the sun topped out at around 600 nits.
  • Console HDR settings are ignored. GTA 6 doesn't use the system HDR calibration you set on PS5 or Xbox Series X|S. Only the in-game sliders decide how the image looks.
  • The sliders affect each other. Maximum Brightness only matches the real in-game peak when Paper White is at 50 or higher. Below 50, actual peak brightness drops, even though the test pattern still shows the value you picked.
  • Paper White 50 makes midtones too bright. At that setting, HUD white and fades to a white screen hit roughly 350 nits. The usual reference for a dark room is 203 nits, so bright and dark areas end up closer together and the picture loses contrast.

So the game puts you in a bind. Set Paper White high enough to get proper highlights and the midtones blow out. Lower it for better contrast and you lose peak brightness the calibration screen says you still have.

The settings Teoh recommends

For Black Levels, Teoh's method is:

  1. Turn off the lights in your room.
  2. Hide the HUD.
  3. Set Black Levels to 0.
  4. Raise it a step at a time until the checkerboard pattern in the background just becomes visible.

On his reference monitor, that point was 20.

For TVs and monitors that can hit 1,000 nits or more, he suggests this starting point:

SettingValue
Maximum Brightness2,000 nits
Black Levels20
Paper White35

The 2,000-nit figure will look wrong if your screen is rated for 1,000. It's there to make up for the gap between the calibration pattern and the game's actual output, and it doesn't mean your panel can reach 2,000 nits. Treat these numbers as a baseline and adjust from there, since Black Levels in particular depends on your display.

Rockstar hasn't commented on the findings. If a patch brings the calibration screen in line with the in-game image, these workaround values may stop being needed. Until then, they're the best fix available for anyone whose HDR picture looks inconsistent.

For more on how the game performs across consoles, see our GTA 6 frame rate explainer and our PS5 Pro vs Xbox Series S comparison.

Sources: Critical Hits, Push Square

Written by AI from the sources listed here, then checked automatically for copied wording and for claims stronger than the sources. How we work

Also available in Español, Português

Keep reading